STAUF USA Adhesive to glue down wood flooring and floor covering | Product Listing STAUF
Menu

PDF version

Technical Data Sheet (TDS)

IFK-100 Refill

Timber Flooring Repair Kit

Special features

  • Fills voids under engineered or solid timber flooring

General Features
  • contains no isocyanates
  • contains no water
  • high shear strength
  • contains no chlorinated solvents
  • contains no solvents
  • contains no VOC
  • nonflammable
  • high solids content
  • ozone friendly
  • special polymer will not etch floors finish
  • strong and moisture curing like urethanes
  • Freeze/thaw stable
  • works under any STAUF adhesive
Installation Features
  • bridges normal sub floor variations
  • eliminates hollow spots
  • very low odour
  • cleans with acetone
  • no dimensional changes in timber flooring
  • higher temp & RH will shorten drying time
  • No risk of sensitization
Long Term Features
  • resistant against aging
  • remains elastic
  • suitable for radiant heat systems
  • allows normal dimensional changes in timber flooring
  • adhesive is waterproof when cured
  • Eliminates hollow spots
  • No health hazards
Drying Time before Installation
  • approx. 12 hours
Temperature Range during Installation
  • 10-30 °C
Relative Humidity Range during Installation
  • 30% - 80%
Packing Size
  • 1 qrt. (0.94 L) Refill - 6 count case
  • 1 gal. (3.79 L) Refill - 6 count case
Weight [lbs./gal.]
  • 10.9
colour
  • cream
Shelf Life
  • 6 Months in original, unopened container
Revision: 2014-10-28 09:58:45

Please enter the email address of the person to whom you would like to send this PDF.